• luxury swimming pool
  • tree top view pool
  • pool through house

High Efficiency Inverter Pool Heat Pumps – Sunshine Coast

Winter is fast approaching and whether you need a new dedicated pump for your swimming pool heating, or you have an existing pool or spa pump that is past its best days, Ken Jordan Swimming Polls has the solution. Pumps for swimming pools, solar heating and spas have come a long way in the last ten years both mechanically and in energy efficiency.

Ken Jordan Swimming Pools has selected several high quality and reasonably priced pool pumps for residential and commercial clients in the South East Queensland region. These pumps are  designed for use in swimming pool and spa filtration systems. To see these units in action please make an appointment to visit our Sunshine Coast display center.

INVERTER-PLUS HEAT PUMP, Up to 50% More Efficient!

AES Australian Energy Systems
Full-class-A efficiency

Inverter-plus is the first inverter heat pump with full-class-A efficiency. Its COP (Coefficient Of Performance) is 8.2~5 (from low speed to high speed, at air 15°C / water 26°C /humidity 70%), which is 50% higher than normal on-o heat pumps, and 25% higher than normal inverter heat pumps.

Full-inverter technology

Inverter plus is designed by full-inverter technology, which adjusts the compressor speed hertz by hertz, then matches your pool intelligently with continuous & highest efficiency. As needed, the inverter plus HP allows the heating capacity from 100% to 33% automatically.

Up to 80% of max output in silence mode

Inverter-Plus technology allows 80% of max output in silence mode, which guarantees the longest quiet running with high COP & high capacity.

10 times quieter than normal on-off heat pumps

Inverter plus adopts super-quiet Mitsubishi inverter compressor and the specialized ventilation system allows 10 times quieter running in low speed.

Softer starter

When the HP turns on, the HP will start from low speed and slowly to high speed, leads to stable and low starting current. The traditional HP starting current is 5-7 times higher than running current.

 

Disclaimer: Images and content on this page have been provided by NCS Pool Heating. Ken Jordan Swimming Pools accepts no responsibility for errors or omissions.